JLG TF6-42 Service Manual - Manuale (Pagina 865)

T12000 ID 04/99 10-84
Reassembly transmission
Figure 434
Install calliper brake mounting screw through brake
assembly and through lock nut. Apply Loctite #262 to
threads and install screw in transmission case.
Figure 435
Mounting screws to be installed to allow free
movement of calliper pads to disc. Tighten jam nut.
See torque chart. See page 4-4 for brake
information.
Figure 436
See special section on page 5-1 for drive plate
installation.