JLG TF6-42 Service Manual - Manuale (Pagina 838)

T12000 ID 04/99 10-57
Reassembly dual modulated valve assembly
Figure 288
Install spring spacer in spring retainer.
Refer to the cleaning and inspection pages.
Figure 289
Install spring in spring retainer.
Figure 290
Check orifice in regulator spool to be free and
clear of any foreign material.
Figure 291
Install spring retainer, spring and regulator valve in
sleeve against inner cross pin.
Figure 292
Compress regulator spool and spring in sleeve far
enough to install cross pin.
Figure 293
Install cross pin.
NOTE: Some units will have two cross pins the same
length. Some units will have two pins of different
lengths. The longest pin goes in the bottom hole.