JLG TF6-42 Service Manual - Manuale (Pagina 648)

T12000 ID 04/99
FOREWORD
This manual has been prepared to provide the customer and the maintenance personnel with information
and instructions on the maintenance and repair of the
SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS product.
Extreme care has been exercised in the design, selection of materials, and manufacturing of these units.
The slight outlay in personal attention and cost required to provide regular and proper lubrication, inspection
at stated intervals, and such adjustments as may be indicated will be reimbursed many times in low cost
operation and trouble free service.
In order to become familiar with the various parts of the product, its principle of operation, troubleshooting
and adjustments, it is urged that the mechanic studies the instructions in this manual carefully and uses it as
a reference when performing maintenance and repair operations.
Whenever repair or replacement of component parts is required, only SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS
approved parts as listed in the applicable parts manual should be used. Use of “will-fit” or non-approved
parts may endanger proper operation and performance of the equipment.
SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS
does not warrant repair or replacement parts, nor failures resulting from the use of parts which are not
supplied by or approved by
SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS SPICER OFF-HIGHWAY PRODUCTS
.
IMPORTANT
A
LWAYS FURNISH THE DISTRIBUTOR WITH THE SERIAL AND MODEL NUMBER WHEN ORDERING PARTS
.