JLG TF6-42 Service Manual Manuale d'uso
Pagina 530
NOTE. The same disassembly procedure applies to both arms and
may only be carried out when levers (3) are released.
Disconnect the tension bar from the steering case. For details, see
«HOW TO REMOVE THE STEERING CYLINDER».
Draw out the screw (1) locking the washer (2) that stops the lever
(3).
Remove washer (2), lever (3) and O-rings (4).
Mark the positions of levers (3) in relation to the thrust levers (12)
and (13).
Draw out the screws (5) and remove bush (6) along with O-ring (7).
Connect the whole arm (8) to the hoist and put the rod under light
tension.
Remove the whole arm; for details, see «CHECKING AND
REPLACING THE BRAKING DISKS».
Remove the braking disks (9) and the whole piston (10).
For details, see «CHECKING AND REPLACING THE BRAKING
DISKS».
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
128
HOW TO DISASSEMBLE THE MECHANIC PARKING BRAKE UNIT - SMONTAGGIO GRUPPO FRENO DI STAZIONAMENTO A COMANDO
MECCANICO - MECHANISQUE HANDBREMSE ABMONTIEREN - DESMONTAJE GRUPO FRENO ESTACIONAMIENTO MECANICO -
DEMONTAGE DU FREIN DE STATIONNEMENT MECANIQUE
F1240657
F1240658
1
2
3
F1240659
4
3
2
12 13
F1240660
5
7
6
F1240641
8
F1240661
10
9