JLG TF6-42 Service Manual - Manuale (Pagina 474)

Remove tool T18 and apply it to the opposite side of the piston (5). Apply grease to head (2) seals, fit the head onto the piston and
push it into the cylinder (3) using a plastic hammer.
NOTE. Insert the head as to line it up with the edge of the cylinder.
Insert the stop ring (4) ensuring that it fits into the seat of the
cylinder (3).
Apply pressure to the head using two screwdrivers or levers until
the head is fastened onto the stop ring (4).
Fit the snap ring (1) on the head (2).
CAUTION! Make sure that the snap ring (1) is securely fastened in
its seat.
If necessary, force it into its seat using a drift and a hammer.
GB GB
GB GB
GB
a b
c d
e
72
HOW TO ASSEMBLE THE STEERING CYLINDER - ASSEMBLAGGIO CILINDRO DI STERZATURA - LENKZYLINDER MONTIEREN -
MONTAJE CILINDRO DE DIRECCION - ASSEMBLAGE DU CYLINDRE DE BRAQUAGE
F1240361
2
5
T18
F1240362
5
T18
2
F1240363
3
4
F1240364
2
F1240354
1
2