JLG TF6-42 Service Manual - Manuale (Pagina 804)

T12000 ID 04/99 10-23
Reassembly 2nd clutch
Figure 121
Use a sleeve with the proper inner diameter to fit over
shaft and against retainer ring. A sharp blow with a
shaft hammer will compress springs and seat
retainer ring. Be sure ring is in full position in groove.
Figure 122
Install first steel (outer) clutch disc.
Figure 123
Install first friction (inner) clutch disc.
Alternate steel and friction until five (5) steel and
five (5) friction discs are in position.
Figure 124
Install clutch disc end plate.
Figure 125
Install end plate retainer ring.
Figure 126
Position thrust bearing inner washer on clutch shaft.