JLG TF6-42 Service Manual Manuale d'uso
Pagina 596
Check that planets have a light clearance in relation to the first
planet gear.
Position the second planetary gear (6) and the second friction unit
(7) into the differential unit (9).
Line the lubrication holes up with the slots in the differential carrier.
Orient the holes of the crown (4) towards the protrusions of the
braking unit.
Position the crown (4) on the differential unit (9) and lock it with the
screws (3) previously coated with Loctite 242.
Torque wrench setting for screws: 128 ± 142 Nm.
NOTE. Tighten screws using the criss-cross method.
If bearings (5) and (8) have been removed, install them using tool
T17.
Install the whole differential assembly (2) into the central body (1).
For details, see «INSTALLING THE DIFFERENTIAL UNIT».
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
194
HOW TO ASSEMBLE THE LIMITED SLIP DIFFERENTIAL UNIT (25% AND 45%) - ASSEMBLAGGIO DIFFERENZIALE A SLITTAMENTO LIMITATO
(25% E 45%) - DIFFERENTIAL MIT BEGRENZTEM GLEITVERMOÈGEN (25% UND 45%) MONTIEREN - ASEMBLAJE DIFERENCIAL A
DESLIZAMIENTO LIMITADO (25% Y 45%) - MONTAJE DIFFERENTIEL A GLISSEMENT REDUIT (25% ET 45%)
F1240803
7
6
9
F1240946
4
3
9
F1240506
8
5
T17
T17
F1240804
1
2