JLG TF6-42 Service Manual - Manuale (Pagina 790)

T12000 ID 04/99 10-9
Disassembly T12000 ID transmission
Figure 43
Remove sleeve and “O”-ring.
Figure 44
Remove output shaft rear bearing.
Figure 45
Remove bearing locating ring.
Figure 46
Remove modulator valve housing.
NOTE: for single modulation and hydraulic inching.
See section 11.1.
Figure 47
Remove inner, middle and outer springs.
Remove valve stop pin and accumulator spool.
Remove regulator spool and sleeve assembly.
Figure 48
Remove sensor hole plug and “O”-ring.