JLG TF6-42 Service Manual - Manuale (Pagina 588)

Introduce tool T14 in-between the planet gears (12). Using two pin-drivers, engage tool T14 in between the planet gears
(12).
CAUTION! Carefully check that tool T14 keeps in an aligned
position with the pins (11) when locked.
Place the differential unit (9) under a press, position bush T15 and
insert gudgeon T16A. Press gudgeon T16A to end of stroke.
Remove gudgeon T16A and bush T15.
NOTE. In this state, the pin (11) is contained within tool T14.
Remove tool T14 and planet pin (11) with it. Leaving the released planet in its position, lock again tool T14.
Repeat pin extraction operation on the second planet pin (11).
Repeat the same operations on the remaining pins.
bar
GB GB
GB GB
GB GB
a b
c d
f e
186
HOW TO DISASSEMBLE THE LIMITED SLIP DIFFERENTIAL UNIT (25% AND 45%) - SMONTAGGIO DIFFERENZIALE A SLITTAMENTO LIMITATO
(25% E 45%) - DIFFERENTIAL MIT BEGRENZTEM GLEITVERMOÈGEN (25% UND 45%) ABMONTIEREN - DESMONTAJE DIFERENCIAL A
DESLIZAMIENTO LIMITADO (25% Y 45%) - DESMONTAJE DIFFERENTIEL A GLISSEMENT REDUIT (25% ET 45%)
F1240809
12
T14
12
F1240491
11
9
F1240492
T16A
T15
T16A
11
9
F1240493
T16A
T15
F1240491
9
F1240809
12
T14
12