JLG TF6-42 Service Manual Manuale d'uso
Pagina 438
Insert the sealing ring (7) of the shaft in the flange (5), using tool T5.
NOTE. Carefully check the assembly side. Also replace the outer
O-ring (6).
Fit the flange (5) onto the u-joint (4).
Heat the bearing (8) at an approx. temperature of 100ë C, fit it on
the u-joint and fasten.
Fit the snap ring (9) on the bearing (8).
Using tools T5 and T6, insert the sealing ring (12) and the bearing
(11) in the bush (13).
NOTE. Carefully check the assembly side of the seal (12).
Fit the snap ring (10) on the bearing (11).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
36
INSTALLATION OF U-JOINT - INSTALLAZIONE DOPPIO GIUNTO CARDANICO - DOPPELGELENKWELLE INSTALLIEREN -
INSTALACION SEMIEJES - INSTALLATION DE JOINT DE CARDAN DOUBLE
F1240373
T5
5
6
7
F1240374
4
5
8
F1240368
9
F1240376
11
12
13
13
T5
T6
F1240377
10
11
FLANGED VERSION - VERSIONE A FLANGIA - AUSFUÈHRUNG MIT FLANSCH - VERSION A BRIDA - VERSION A FLASQUE
COUPLING VERSION - VERSIONE A MANICOTTO - AUSFUÈHRUNG MIT MUFFE - VERSION A MANGUITO - VERSION A MANCHON