JLG TF6-42 Service Manual - Manuale (Pagina 831)

T12000 ID 04/99 10-50
Reassembly reverse clutch
Figure 262
Install piston return disc springs. First spring with
large diameter of bevel towards wear plate.
Alternate five (5) springs. NOTE: see page 10-85.
Figure 263
Position return spring ring retainer on clutch shaft.
Figure 264
Start ring on shaft with snap ring pliers.
Figure 259
Clutch piston bleed orifice must be clean and
free of any foreign material. Refer to the cleaning
and inspection pages.
Figure 260
Install inner and outer clutch piston seal rings.
Size inner ring as explained in figure 93.
Install clutch piston in clutch drum.
Use caution as not to damage sealing rings.
Figure 261
Install clutch piston wear plate.