JLG TF6-42 Service Manual Manuale d'uso
Pagina 568
Remove check screws (17) from cylinder (18).
Remove cylinder (18) complete with guide pin (19) of piston (12).
NOTE. Take note of direction of assembly.
With the help of a lever, prize off the distance piece (23) complete
with O-ring (24).
NOTE. Thoroughly clean the face of bevel pinion support where
the hub rests, check the O-ring (24) and replace it if necessary.
Remove friction discs (25), (26) and hub (27).
3-FUNCTION VERSION ONLY
Loosen nuts (28) (no. 3) and unscrew dowels (29) (no. 3) to retract
the adjustment points (30).
NOTE. Loosen dowels (29) in an alternate manner until the piston
comes to end of backstroke.
ONLY IF NECESSARY. Remove points (30).
3-FUNCTION VERSION ONLY
Loosen and remove the pin-type screws (31).
NOTE. Loosen screws (31) in an alternate and criss-cross manner.
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
166
HOW TO DISASSEMBLE THE 4" INCOMING BRAKE (2 AND 3 FUNCTION VERSIONS) - SMONTAGGIO FRENO IN ENTRATA DA 4" (A 2 E 3
FUNZIONI) - BREMSE AM EINGANG ZU 4" (MIT 2 UND 3 FUNKTIONEN) ABMONTIEREN - DESMONTAJE FRENO EN ENTRADA DE 4" (A 2 Y 3
FUNCIOONES) - DESMONTAJE FREIN EN ENTREE 4" (A 2 ET 3 FONCTIONS)
F1240769
17
17
18
F1240770
18
19
F1240771
23
24
F1240772
26
25
27
F1240773
29
28
30
28 29
F1240774
31