JLG TF6-42 Service Manual Manuale d'uso

Pagina 464

Advertising

CAUTION. Eliminate the action of the negative brake, if fitted.

Apply tools T12 to the hubs and lock them.

Using a level "B", check that tools are perfectly flat and parallel to

each other.

Connect the sensor (1) to the inspection device according to either

diagram.

Sensor connection card, STANDARD version.

Sensor connection card, OPTIONAL version.

Centre the piston by slowly moving it first in one direction then in

the other and position it half way on the stroke, which is determined

by the switching on and off of the signal lamp of the inspection

device in the reversal stage.

Inspect jut "C" on one side of the piston and note down the size for

checking later adjustments.

NOTE. If cylinders come without a sensor, the centring of the

piston must be carried out on the basis of the maximum stroke.

bar

HOW TO INSTALL THE STEERING CYLINDER - INSTALLAZIONE CILINDRO DI STERZATURA - LENKZYLINDER INSTALLIEREN -

INSTALACION CILINDRO DE DIRECCIOÂN - INSTALLATION DU CYLINDRE DE BRAQUAGE

F1240415

T12

F1240416

D1240029

I max=0,80 A

NERO
BLACK

BLU
BLUE

MARRONE
BROWN

2 A

CONNETTORE
CONNECTOR

BATTERIA
BATTERY

D1240030