JLG TF6-42 Service Manual - Manuale (Pagina 827)

T12000 ID 04/99 10-46
Reassembly forward clutch
Figure 239
Clutch piston bleed orific must be clean free
of any foreign material. Refer to the cleaning and
inspection pages.
Figure 240
Install inner and outer clutch piston seal rings.
Size inner ring as explained in figure 93. Install clutch
piston in clutch drum. Use caution as not to damage
sealing rings.
Figure 241
Install clutch piston wear plate.
Figure 242
Install piston return disc springs. First spring with
large diameter of bevel towards wear plate.
Alternate five (5) springs. NOTE: see page 10-85.
Figure 243
Position return spring ring retainer on clutch shaft.
Figure 244
Start ring on clutch with snap ring pliers.