JLG TF6-42 Service Manual - Manuale (Pagina 814)

T12000 ID 04/99 10-33
Reassembly 4th clutch
Figure 169
Clutch piston bleed ball must be clean and
free of any foreign material. Refer to the cleaning
and inspection page. For the 3-speed version,
proceed to figure 189
Figure 170
Install inner and outer clutch piston seal rings.
Size inner ring as explained in figure 93.
Install clutch piston in clutch drum.
Use caution as not to damage sealing rings.
Figure 171
Install clutch piston wear plate.
Figure 172
Install piston return disc springs. First spring with
large diameter of bevel towards wear plate.
Alternate five (5) springs. NOTE: see page 10-85.
Figure 173
Position return spring ring retainer on clutch shaft.
Figure 174
Start ring on shaft with snap ring pliers.