JLG TF6-42 Service Manual - Manuale (Pagina 510)

Lubricate the outer surface of the new sealing ring (6) and fit it onto
the central body (12) using tool T27.
Install the swinging support (5).
NOTE. Check that it is properly oriented.
Fit the flange (2) complete with the guard (4) and fasten it.
For keying the flange (2), use a plastic hammer if necessary.
NOTE. Make sure that the guard (4) is securely fastened onto the
flange and that it is not deformed.
Apply Loctite 242 to the threaded part of the pinion (8).
Position tool T20A (or T20B) and fasten it in order to avoid rotation.
Insert O-ring (3) the nut (1) and tighten it using a dynamometric
wrench.
Torque wrench setting: 280±310 Nm
Remove blocks T23 (used for extracting the pinion) and re-install
the arms.
For details, see «CHECKING WEAR AND REPLACING THE
BRAKING DISKS».
GB GB
GB GB
GB
a b
c d
e
108
HOW TO INSTALL AND ADJUST THE BEVEL PINION - INSTALLAZIONE E REGISTRAZIONE PIGNONE CONICO - KEGELRAD INSTALLIEREN
UND EINSTELLEN - INSTALACION Y AJUSTE DEL PINÄON CONICO - INSTALLATION ET REGLAGE DU PIGNON CONIQUE
F1240546
4
2
F1240547
(T20B)
T20A
F1240579
T23
F1240545
12 T27
6
F1240517
5