JLG TF6-42 Service Manual Manuale d'uso
Pagina 582
Check the state of the O-ring (40).
Lubricate sealing ring (38) and fit flange (5) into the cover (8).
Fit the Belleville washers (11) onto the cover (8), thoroughly
checking washers orientation.
Lubricate the O-ring (40) and install the cover assembly (8).
Fit screws (6) and washers (7); lock the cover with a torque wrench
setting of 116 ± 128 Nm.
NOTE. Tighten in an alternate and criss-cross manner.
Apply Loctite 242 to the threaded portion of the pinion, fit O-ring (4)
and nut (3); tighten the nut with a dynamometric wrench set to
280 ± 310 Nm.
NOTE. Use tools T21-T22.
Install the lubrication tube (2).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
180
HOW TO ASSEMBLE THE 4" INCOMING BRAKE (2 AND 3 FUNCTION VERSIONS) - ASSEMBLAGGIO FRENO IN ENTRATA DA 4" (A 2 E 3
FUNZIONI) - BREMSE AM EINGANG ZU 4" (MIT 2 UND 3 FUNKTIONEN) MONTIEREN - ASEMBLAJE FRENO EN ENTRADA DE 4" (A 2 Y 3
FUNCIONES) - MONTAJE DEL FREIN EN ENTREE 4" (A 2 ET 3 FONCTIONS)
F1240794
5
8
38
40
F1240795
8
11
9
10
11
F1240796
8
40
F1240797
8
7
6
F1240798
F1240764
2