JLG TF6-42 Service Manual Manuale d'uso
Pagina 536
Connect the braking circuit and apply maximum working pressure
to set the disks.
Release the pressure, loosen nut (15) and unscrew dowel (16) by a
few turns.
Apply a force of 8 ± 10 N (0.8 ± 1 kg) to lever (3). Direct the force
towards the braking direction in order to eliminate the idle stroke.
While the force is being applied, tighten dowel (16) until it is caused
to rest onto bush (6).
Lock dowel (16) in this position with nut (15).
Torque wrench setting: 20 ± 25 Nm.
CAUTION! The idle stroke should be eliminated without preloading
thrust levers (12) and (13).
CAUTION! After connecting the control cable, check that when
brakes are released both dowels (16) do lean against bush (6).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
134
HOW TO ASSEMBLE THE MECHANIC PARKING BRAKE UNIT - ASSEMBLAGGIO GRUPPO FRENO DI STAZIONAMENTO A COMANDO
MECCANICO - MECHANISQUE HANDBREMSE MONTIEREN - ASEMBLAJE GRUPO FRENO ESTACIONAMIENTO MECANICO -
ASSEMBLAGE DU FREIN DE STATIONNEMENT MECANIQUE
F1240936
16
15
3
F1240938
3
6
16
8
÷
10 N
(0,8
÷
1 kg)
F1240936
16
15
3