JLG TF6-42 Service Manual Manuale d'uso
Pagina 506
The variation is to be added to a set value of 0.12±0.13 mm., so as
to obtain the size of shim "S1" (11) which will be inserted between
the external bearing (13) and the distance piece (10) and
subsequently, to determine the preload for the bearings.
Position the internal bearing (9) and the pinion (8) under a press;
force the bearing onto the pinion.
Fit the pinion (8), shim "S1" (11) and distance piece (10) in the main
body (12).
NOTE. The finer shims must be placed in- between the thicker
ones
Insert the external bearing (13) in the central body in order to
complete the pack arranged as in the figure.
Connect the pinion (8) to the tie rod T28A and T28B; connect the
tie rod T28C (see special tools) to the press and block.
Apply Loctite 242 to the thread of the ring nut (7) and screw the nut
onto the pinion (8).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
104
HOW TO INSTALL AND ADJUST THE BEVEL PINION - INSTALLAZIONE E REGISTRAZIONE PIGNONE CONICO - KEGELRAD INSTALLIEREN
UND EINSTELLEN - INSTALACION Y AJUSTE DEL PINÄON CONICO - INSTALLATION ET REGLAGE DU PIGNON CONIQUE
F1240541
11
S
1
H+0,12
÷
0,13=S1
F1240542
8
9
F1240543
8
11
12
10
F1240575
8
F1240538
11
13
10
9
F1240539
7
8