JLG TF6-42 Service Manual - Manuale (Pagina 496)

Position wrench T22 onto the ring nut (7) and apply bar hold T21 to
the pinion (8).
Stop wrench T22 and rotate the pinion so as to release and remove
the ring nut (7).
NOTE. If disassembly proves awkward, weld the ring nut at approx.
80ëC.
Apply blocks T23 and, with the help of a puller, extract the pinion
(8) complete with the internal bearing (9), the distance piece (10)
and shims (11).
NOTE. The thrust blocks of the bearings remain in the central body
(12).
Remove the pinion (8), shims (11) and distance piece (10). Using a puller and a press, remove the inner bearing (9) from the
pinion (8).
Remove the thrust block of the external bearing (13). Insert a drift in the appropriate holes and remove the thrust block of
the internal bearing (9) as well as the shim washers (14).
GB GB
GB GB
GB GB
a b
c d
f e
94
HOW TO REMOVE THE BEVEL PINION - RIMOZIONE PIGNONE CONICO - KEGELRAD ABMONTIEREN -
REMOCION PINÄON CONICO - DEPOSE DU PIGNON CONIQUE
F1240519
7
T21
T22
F1240543
8
11
10
F1240578
8
9
F1240520
8
T23
12
F1240521
13
F1240522
9
14