Energizing the grill, Heat settings, Turning “off” the grill – Kenyon Frontier Series 21 Inch Portable Electric Grill Owners Manual Manuale d'uso

Pagina 16: Automatic shut-off

Advertising
background image

ENERGIZING THE GRILL

To turn the grill ON, touch and hold the Master

Power Sensor for two seconds. The controller

will then beep and the Power On Indicator

will illuminate.

POWER ON

INDICATOR

MASTER

POWER SENSOR

POWER LEVEL

DISPLAY (HEAT

SETTING 8

SELECTED)

HEAT SETTINGS

Your KENYON grill has 8 different heat set-

tings, from 1 through 8, selected using the (

-

)

and (

+

) sensors. The heat setting is displayed

as shown at the right. The heating element

cycles at different time intervals to vary the

heat level. As the setting is increased, the heat-

ing element will remain on for a longer period,

increasing the cooking temperature of the grill.

16

TURNING “OFF” THE GRILL

To turn off the grill, simply

touch and hold

the Master Power Sensor for

two seconds

.

The controller will de-energize and shut off the heating element.

IN AN EMERGENCY THE 120V GRILL CAN BE TURNED OFF BY PRESSING THE “TEST”
BUTTON ON THE GFCI. REFER TO FIG. 5.

AUTOMATIC SHUT-OFF

The electronic control of your KENYON grill has been programmed with safety in mind and features

an automatic shut-off. The grill is programmed to shut down after a predetermined time after being

energized (see table below). The control will also shut off if it reaches a preset temperature limit. If

this occurs, allow the grill to cool down for 20-30 minutes.

Advertising