Campomatic C46VM - Manuale (Pagina 19)

Pump oil substitution warning (Oil cycle counter)
The SV46 is equipped with a high-performance vacuum pump, which is lubricated by a special oil
which has been designed for this application. During the use of the machine, the oil undergoes
normal deterioration due to the absorption of impurities and liquids. Consequently, in order not to
compromise the performance of the device, it is necessary to undertake an oil change every 2500
cycles, which corresponds to around 150 hours of work. The SV46 signals when it is time to
undertake an oil change.
Note: The oil change must only be carried out by an authorised Retailer.
When the machine is started-up and has reached 2500 cycles for the first time, all the lights on
the command panel come on and blink for 3 seconds and an acoustic signal (long Beep)
can be heard. This type of visual and acoustic signal warns you that it is necessary to proceed
with substituting the pump oil.
Note: Any cycle can be activated, even when the machine is in an alarm state.
The alarm is zeroed with the first oil substitution.
Fault signals
The SV46 is made in compliance with all European norms and directives in force on the subject
and furthermore is equipped with security systems to guarantee user safety.
If a situation should arise with a fault at an electrical level, the machine goes into an alarm state,
which is signalled in the following way:

All the lights on the command panel blink.

The commands are blocked automatically.
SIGNALS AND WARNINGS
19