Campomatic C46VM - Manuale (Pagina 17)

The cycle proceeds automatically in the following order:
The evacuation phase is signalled by the light for the button blinking. The phase lasts
around half a minute.

During the unloading following phase all the lights go back to the initial start-up situation.
The discharge valve is open for 20 seconds.

At the end of the cycle, an acoustic signal is emitted (short Beep), which indicates
that the machine is ready for a new cycle. The basin appears decompressed enabling the
container to be extracted.

Note: The cycle can be interrupted early by pressing the button.
Close the container air-evacuation valve quickly, in order to avoid air coming back into the
container.
Note: The vacuum obtained by this cycle is around 80% of the vacuum which can be
reached with the SV46 and is indicated for plastic containers not intended for professional
use.
Long preserving cycle for jars
Once the container inside the vacuum-chamber has been prepared as described in the
"preparation" chapter, close the lid by pressing lightly on its front and selecting the button at
the same time, keep it pressed down for five seconds.
When the cycle starts, an acoustic signal is emitted (short Beep).
17