Fronius Symo x.x-3-S Manuale d'uso
Pagina 50

48
*) If the status code is displayed all the time: notify a Fronius-trained service engineer
**) If this status code keeps recurring, contact your system engineer
Class 6 status
codes
Some of the class 6 status codes necessitate intervention by a Fronius-trained service en-
gineer.
*) If the status code is displayed all the time: notify a Fronius-trained service engineer
**) Fault is rectified automatically. If this status code keeps recurring, contact your system
engineer
Class 7 status
codes
Class 7 status codes relate to the control system, the configuration and inverter data re-
cording, and may directly or indirectly affect the process of feeding energy into the grid.
572
Power limited by the power
stage set
Power is being limited
by the power stage set
*)
573
Undertemperature warning
Warning message on
the display
*)
Code
Description
Behaviour
Remedy
Code
Description
Behaviour
Remedy
601
CAN bus is full
The inverter is not feeding
any energy into the grid.
Update inverter firm-
ware; *)
603
AC module temperature sensor faulty
(L3)
The inverter will automati-
cally attempt to connect
again and, if possible, will
resume feeding energy into
the grid
*)
604
DC module temperature sensor faulty
607
RCMU error
The inverter is not feeding
any energy into the grid.
Reset status code by
pressing 'Enter'. The in-
verter resumes the feed-
ing of energy into the
grid; if the status code
keeps appearing, check
the complete photovol-
taic system for damage;
**)
608
Functional incompatibility (one or more
PC boards in the inverter are not com-
patible with each other, e.g. after a PC
board has been replaced)
The inverter is not feeding
any energy into the grid.
Update inverter firm-
ware; *)
Code
Description
Behaviour
Remedy
701 -
716
Provides information about the
internal processor status
Warning message on the
display
*)
721
EEPROM has been re-initial-
ised
Warning message on the
display
Acknowledge status code; *)
722 -
730
Provides information about the
internal processor status
Warning message on the
display
*)