Videotec DCJ - Manuale (Pagina 225)

Page 93 MNVADCJ01_0543
To enable the various functions press the keys required by the on-screen menu. The following table shows the
functions available in the menu with the corresponding keys on the DCJ:
The numeric keys enable the various items in the on-screen menu.
Joystick 4 : selecting the menu items
If it is necessary to use telemetry (move the dome) while inside the on-screen menu, use the joystick and at the
same time keep the 6
7.0

 corresponds to the <SEQ> control on the on-screen menu.
 corresponds to the <1 st > contorl on the on-screen menu. In many cases it will switch to the inital display in
the menu.
 corresponds to the <ALARM> control on the on-screen menu.
 corresponds to the <SET> control on the on-screen menu.
 corresponds to the <CLR> control on the on-screen menu.
 end of setup.
If necessary, see the dome handbook for further details.
6.13.4 Using the d ome
Joystick:
4
:positioning the dome.
1
: zoom in and zoom out.
and



: iris close and iris open.
 and 



: focus near and focus far.

















: autofocus.
 : activates the “Stabilize" function.
 : passage from “day” mode to “night” mode, and vice versa.
6.13.5 Autopan
 : start autopan.
Moving the joystick will pass to manual operation of the dome.
See the dome handbook for further details.
6.13.6 Preset, sca n
55

(1÷63): store the current position as preset position number XX.
55

(1÷63): movement towards preset position XX.