Videotec DCJ - Manuale (Pagina 217)

Page 85 MNVADCJ01_0543
6.10 Hitron Fas trax II Dome
6.10.1 Material an d reference documents
Fastrax II HID2404SM11P Dome
Fastrax II (HID-2404) Protocol and Examples
6.10.2 Connection
6.10.2.1 Cable
White
Yellow
RS485A
RS485B
TX +
TX -
6.10.2.2 Setting up th e dome
The dome number should be configured correctly.
The protocol should be set as FASTRAX II.
The baud rate can be selected between: 2400 (default), 4800, 9600 baud.
Consult the dome manual.
6.10.2.3 Setting up th e keyboard
While configuring the keyboard, the submenu RRQRO , should have the
following settings:
PROP
5272*2UD (675(;
211,*7D,UPO
(8+5(7,D
The baud rate should correspond to the one chosen for the
dome.
6.10.3 Configurati on
Dome configuration is mostly carried out using the On Screen Menu.
For all dome setup operations the keyboard should be enabled for TELEMETRY CONFIGURATION (menu
Q RQ R
P ).
6.10.3.1 OSM Config uration
Directly connect the dome to the keyboard as shown in the diagram and a monitor to the dome video output.
-
start dome configuration.
The dome shows the on screen menu; the keyboard display shows the mode change:
 

6*72,1+
 end of configuration.
The ESC key required by dome configuration procedure is replaced by the  key.
Important note! When exiting dome configuration it is necessary to press 

to return the keyboard to normal
operation.