Videotec DCJ Manuale d'uso
Pagina 203
Page 71
MNVADCJ01_0543
6.6.10 Auto scan c ontrol
6.6.10.1 Control
Normal
Alarm
7&!
:
7&"
:
start
stop
7&#
:
7&$
:
start
stop
6.6.10.2 Preset posit ions
7!***
: add all preset positions
7!*55
(1÷99): add a single preset position
7!!**
: remove all preset positions
7!!55
(1÷99): remove a single preset position
7!"55
(1÷99): dwell time in seconds after reaching a position
7!#**
: request a maximum speed movement
7!#*5
(1÷8): set a reduced speed factor
6.6.10.3 Alarm positi ons
7"***
: add all alarm positions
7"*55
(1÷99): add a single alarm position
7"!**
: remove all alarm positions
7"!55
(1÷99): remove a single alarm position
7""55
(1÷99): dwell time in seconds after reaching a position
7"#**
: request a maximum speed movement
7"#*5
(1÷8): set a reduced speed factor
6.6.11 Timers
7$*55
(00÷56): autopan stop
00: continuous; 01÷23: from 5 to 115 minuts (step 5 minutes); 24÷44: from 2 to 12 ore (step 30 minuts); 45÷56:
from 13 to 24 hours (step 1 hour)
7$555
(1ч8, 00ч28): aux contacts reset.
The first X cypher is the number of Aux contact (1÷8); the following ones the time:
00: continuous; 01÷05: from 1 to 5 minuts (step 1 minute); 06÷15: from 10 to 55 minuts (step 5 minuts); 16÷27:
from 1 to 12 hours (step 1 hour); 28: 24 hours
7$)55
(00÷28): wiper stop*
7%*55
(00÷28): washer stop*
7%!55
(00÷28): light stop*
7%"55
(00÷28): heater stop*
7%#55
(00÷28): fan stop*