Intel BLADE SERVER IXM5414E - Manuale (Pagina 75)

52 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
IP Address The IP address of the interface. The factory default value is 0.0.0.0.
Subnet Mask The IP subnet mask for this interface. The factory default value is 0.0.0.0.
Default Gateway
The default IP gateway address for this interface. The factory default value is
0.0.0.0.
Network Configuration Protocol
Indicates what network protocol was used on the last, or current power-up cycle, if
any. The factory default and fixed method is DHCP.
Burned In MAC Address
The burned-in MAC address used for in-band connectivity if you choose not to
configure a locally administered address.
Web Mode Specify whether the switch may be accessed from a web browser through TCP port
80. If you choose to Enable web mode you will be able to manage the switch from a
web browser. The factory default is Enabled.
Java Mode Enable or Disable the java applet that displays a picture of the switch at the top right
of the screen. If you run the applet you will be able to click on the picture of the
switch to select configuration screens instead of using the navigation tree at the left
side of the screen. The factory default is Enabled.
Click the Apply button to update the switch with new values. If you want the switch to retain the
new values across a power cycle you must perform a save.
Telnet
Use this panel to configure Telnet settings.