Intel BLADE SERVER IXM5414E - Manuale (Pagina 201)

178 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
Transmit Packet Errors
The number of outbound packets that could not be transmitted because of errors.
Address Entries Currently In Use
The number of learned and static Forwarding Database Address Table entries
currently in use by this switch module.
VLAN Entries Currently In Use
The number of VLANs currently in the VLAN table on this switch module.
Time Since Counters Last Cleared
The elapsed time in days, hours, minutes and seconds since the statistics for the
switch were last cleared.
show sysinfo
Use this command to display switch information.
Format show sysinfo
Switch Description
The product name of the switch.
System Name
The name used to identify the switch.
System Location
Text used to identify the location of the switch. May be up to 31 alphanumeric
characters. The factory default is blank.
System Contact
Text used to identify a contact person for the switch. May be up to 31 alphanumeric
characters. The factory default is blank.
System ObjectID
The base object ID for the switch’s enterprise MIB.
System Up Time
The time in days, hours and minutes since the last reboot.
MIBs Supported
The list of MIBs supported by the management agent running on the switch.
System utilities
System utility commands
The commands in this section allow you to fine tune your systems performance and functionality.
clear config
Use this command to reset the configuration of the switch module to the factory defaults. The switch
is automatically reset when this command is processed. All configuration changes that you have
made, including those saved to NVRAM, will be lost. You will be prompted to confirm that the reset
should proceed.
Format clear config