Intel BLADE SERVER IXM5414E - Manuale (Pagina 190)

Command Line Interface Management 167
Enable -
traps will be sent
Disable -
traps will not be sent.
System configuration
Network connectivity
config network javamode
Use this command to enable or disable the java applet that displays a picture of the switch module at
the top right of the screen when you are using the Web interface. If you run the applet you will be
able to click on the picture of the switch to select configuration screens instead of using the
navigation tree at the left side of the screen. The factory default is disabled.
Default disable
Format config network javamode <enable/disable>
config network webmode
Use this command to enable or disable access to the switch module via the Web interface. When
access is enabled a user can login to the switch from a web browser through TCP port 80. Disabling
access takes effect immediately on all interfaces.
Default enable
Format config network webmode <enable/disable>
show network
Use this command to display network configuration settings that are necessary for in-band
connectivity.
Format show network
IP Address The IP address of the interface. The factory default value is 0.0.0.0.
Subnet Mask The IP subnet mask for this interface. The factory default value is 0.0.0.0.
Default Gateway
The default IP gateway address for this interface. The factory default value is
0.0.0.0.
Burned In MAC Address
The burned-in MAC address used for in-band connectivity if you choose not to
configure a locally administered address.
Network Configuration Protocol Current
Indicates that the switch will transmit a DHCP request following power-up.
Web Mode Indicates whether the switch may be accessed from a web browser. If web mode is
enabled you can manage the switch from a web browser. The factory default is
enabled.
Java Mode Indicates whether the java applet that displays a picture of the switch at the top right
of the screen is enabled or disabled. If the applet is enabled you will be able to click
on the picture of the switch to select configuration screens instead of using the
navigation tree at the left side of the screen. The factory default is disabled.