Intel BLADE SERVER IXM5414E - Manuale (Pagina 227)

204 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
VLAN Name
A string associated with this VLAN as a convenience. It can be up to 16
alphanumeric characters long, including blanks. The default is blank. VLAN ID 1
always has a name of ‘Default’. This field is optional.
VLAN Type What type of VLAN this is. A VLAN can be:
• the Default VLAN (VLAN ID = 1)
• a static VLAN, one that is created using the config vlan create command
• a Dynamic VLAN, one that is created by GVRP registration
In order to change a VLAN from dynamic to static, use the config vlan makestatic
command.
BcastStorm This displays the administrative mode of broadcast storm control for this VLAN. If
storm control is enabled, storms are controlled by counting the number of broadcast
packets within a certain time period. If a count limit is exceeded, the packets are
discarded.
McastStorm This displays the administrative mode of multicast storm control for this VLAN. If
storm control is enabled, storms are controlled by counting the number of multicast
packets within a certain time period. If a count limit is exceeded, the packets are
discarded.
Class of Service commands
config classofservice 802.1pmapping
Use this command to map an User priority to a Traffic Class priority queue.
Default = see table below
Format config classofservice 802.1pmapping <0-7> <0-7>
Table 6. Classofservice 802.1p Mapping
IEEE 802.1p priority IXE5416 priority queue
0 2
1 1
2 0
3 3
4 4
5 5
6 6
7 7