ORLA Stage Studio - Manuale (Pagina 18)

18
VOLUME PEDAL
If necessary it is possible to connect a Volume Pedal, but it is necessary to set the instrument.
Insert the volume pedal jack plug in the socket in the back of the instrument (Expression in the
panel).
To program the volume pedal parameters follow these procedures:
-
Press the SPLIT and METRONOME buttons at the same time (their Leds are blinking).
The display indicate:
- Press the E.PIANO1 button to continue the setting and the display indicate:
-
Now, set the volume pedal to minimum volume and press the (\/) Down button. The display
indicates now
-
Now, set the volume pedal to maximum volume and press the (/\) UP and button. The
display indicates now
NOTE - The number indicated may be different when using different types of Volume Pedals.
- In case the Volume Pedal used is working in the opposite way, press the HARPSI button and
the display will indicate: