Clay Paky SHADOW - Manuale (Pagina 9)

• Focusing - QS-LT version
Turn knob (13) on the rear of the projector
until the projected image is perfectly
sharp; this procedure can be checked
by means of the pointer (14) which
provides an indication of the focus-
ing distance as shown on
label (15).
13 14 15
The controls are on the dedicated panel which can be tilted downwards through an
angle of 90° starting from a position on the same axis as the projector body.
KEY
A) 8 push buttons with indicator lights for insertion of fixed colours with two-colour
beam function by pressing two adjacent buttons simultaneously;
B) 2 flash buttons for instant iris opening;
C) 2 flash buttons for instant stopper opening;
D) 1 potentiometer for iris aperture adjustment;
E) 1 potentiometer for adjusting the dimmer aperture or strobe frequency;
F) 1 potentiometer for adjusting the rotation speed of the colour wheel
(with selector I set to rainbow);
G) 1 dimmer or strobe selector;
H) 1 colour temperature conversion selector;
I)
1 rainbow effect or fixed colour selector.
QS CONTROL PANEL 5
OPEN SLOW FAST OPEN
0 % 100 %
CLOSED OPEN
0 % 10 %
SLOW FAST
0 % 10 %
WHITE RED YELLOW MAGENTA GREEN ORANGE BLUE VIOLET
RAINBOW
STROBE
DIMMER
6.000 K
5.600 K
3.200 K
STOP
IRIS
COLOUR
®
OPEN
OPEN
OPEN
OPEN
FIXED
COLOURS
A I H
G F D E B C B C
KEY
A) 2 flash buttons for instant stopper opening;
B) 2 flash buttons for instant rainbow effect;
C) 2 flash buttons for instant iris opening;
D) 1 selector for dimmer or strobe effect;
E) 1 selector for rainbow effect or fixed colours;
F) 1 potentiometer for iris aperture adjustment;
G) 1 potentiometer for rainbow speed adjustment or selection of fixed colour;
H) 1 potentiometer for dimmer aperture adjustment or strobe frequency.
BASIC CONTROL PANEL 6
0 100
RAINBOW
STOP
COLOUR
IRIS
STOP
COLOUR
IRIS
STROBO
®
5
0 100 5
0 100 5
D H G B A A B
C F E C
E
N
G
L
IS
H
9
• COLOUR TEMPERATURE CONVERSION - channel 4
0
1
2
3
4
5
6
7
8
9
10
The warm filter is inserted from 0% to
33.2% of slider movement, no filter is
present from 33.7% to 67.0%, and the
cool filter is inserted from 67.5% to
100% of slider movement.
Cold Filter
Warm Filter
FOCUSING 4
• Focusing - QS-ST version
Set up the channels as shown in
the table. Unscrew knob (11) and
move the lens (12) forwards and
back until the projected image is
perfectly sharp. Secure the lens by
tightening knob (11).
12 11
CHANNEL FUNCTION
1 IRIS
2 COLOUR WHEEL
3 DIMMER/STOPPER/ STROBE
4 COLOUR TEMPERATURE CONVERSION
POSITION
100% (Maximum aperture)
0% (White)
100% (Open)
0% (White)