Pioneer VSX-418 S - Manuale (Pagina 32)

The System Setup menu 06
32
En
2 Use / to choose the speaker that you
want then set the distance.
Use / to adjust the distance of each
speaker (in 0.1 meter increments).
The Input Assign menu
Assigning the digital inputs
• Default settings:
COAX 1 (coaxial) – DVD
COAX 2 (coaxial) – DVR
OPT 1 (optical) – CD
You only need to do this if you didn’t connect
your digital components according to the
defaults above. This tells the receiver what
component is connected to which terminal so
it corresponds to the buttons on the remote.
1 Select ‘IN ASSIG.’ from the System Setup
menu.
2 Make sure ‘DIG. IN’ is selected from IN
ASSIG. menu and then press ENTER.
3 Use / to select the number of the
digital input to which you’ve connected your
digital component.
The numbers correspond with the numbers
beside the inputs on the rear of the receiver.
4 Select the component that corresponds
with the one you connected to that input.
• Use the / buttons and ENTER to select
DVD , TV , CD , CDR , DVR or OFF .
• If you assign a digital input to a certain
function (for example, DVD ) then any
digital inputs previously assigned to that
function will automatically be switched off.
5 Press RETURN after making the
adjustments necessary for each setting.
VSX_418_MY.book 32 ページ ２００７年１２月２７日 木曜日 午後４時３３分