Pioneer VSX-915-K - Manuale (Pagina 70)

Additional information 13
70
En
Chapter 13:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized independent service company to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
Problem Remedy
The power does not turn on. • Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the
rear panel. This could cause the receiver to shut off automatically.
• If the power shuts off automatically, take the unit to your
nearest
Pioneer authorized service center or your dealer for servicing.
No sound is output when a
function is selected. • Make sure the component is connected correctly (refer to
Connecting up on page 15).
• Press MUTE on the remote control to turn muting off.
• Press SPEAKERS to select the proper speaker set (see Switching the
speaker system on page 63).
• Press SIGNAL SELECT to select the proper input signal (see
Choosing the input signal on page 37).
No image is output when a
function is selected. • Make sure the component is connected correctly (refer to
Connecting up on page 15).
• Select the correct component (use the input select buttons).
• Check
Assigning the component video inputs on page 67 to make
sure you’re assigned the correct input.
• The video input selected on the TV monitor is incorrect. Refer to the
instruction manual supplied with the TV.
VSX_915.book.fm 70 ページ ２００５年２月１日 火曜日 午前１１時６分