Pioneer VSX-915-K - Manuale (Pagina 65)

Other connections 11
65
En
English
Français
Deutsch
Nederlands
Italiano
Español
Caution
• Make sure you use a parallel (not series,
which are fairly uncommon) connection
when bi-wiring your speakers.
• Don't connect different speakers from the
same terminal in this way.
Connecting additional
amplifiers
This receiver has more than enough power for
any home use, but it’s possible to add
additional amplifiers to every channel of your
system using the pre-outs. Make the
connections shown below to add amplifiers to
power your speakers.
• Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.
• You can use the additional amplifier on the
surround back channel pre-outs for a single
speaker as well. In this case plug the amplifier
into the left (
L (Single) ) terminal only.
• The sound from the surround back
terminals will depend on how you have
configured the
Surround back speaker
setting on page 42.
• To hear sound only from the pre-outs,
simply disconnect any speakers that are
connected directly to the receiver.
• If you’re not using a subwoofer, change the
front speaker setting (see Speaker setting
on page 47) to LARGE .
Using this receiver with a
Pioneer plasma display
If you have a Pioneer plasma display 1 , you can
use an SR+ cable 2 to connect it to this unit
and take advantage of various convenient
features, such as automatic video input
switching of the plasma display when the input
is changed.
R
S-VIDEO
P R
ø N
N ¥
R L SURROUND L D BACK B
PREOUT
R R R
L L L
FRONT
CENTER
SURROUND BACK SURROUND
INPUT
L R
ANALOG
INPUT
L R
ANALOG
INPUT
L R
ANALOG
INPUT
ANALOG
INPUT
ANALOG
Front channel
amplifier
Surround channel
amplifier
Surround back
channel amplifier
Center channel
amplifier (mono)
Powered
subwoofer
To SUB WOOFER PREOUT jack
Note
1 This receiver is compatible with all Pioneer plasma displays from 2003 onward.
2 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed
mini phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you
switch the plasma display off.
CONTROL
OUT
IN
AM
LOOP
FM UNBAL 75 Ω
IN
OUT
VIDEO
IN
IN
IN
OUT OPT
OPT
AUX
CD R
DVR/
VCR
TV / SAT
( D V R / V C R )
1
2
ANTENNA
DVR/
VCR
IN
OUT
DIGITAL OUT
OPT
MONITOR OUT
OUT
CONTROL
Pioneer plasma
display
VSX_915.book.fm 65 ページ ２００５年２月１日 火曜日 午前１１時６分