Proel FREE10LT - Manuale (Pagina 8)

8
level auxiliary source, each RCA input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
2. CH1 LINE IN (MINI JACK)
This is a MINI JACK (3.5mm) female connector that accepts a STEREO MINI JACK plug from Computer /
CD / DVD / MP3 players. The MINI JACK is wired as follows:
Tip = positive signal of left channel
Ring = positive signal of right channel
Sleeve = shield or ground
3. CH1 LEVEL
This potentiometer sets the level of the CH1 LINE IN or the internal player.
4. CH1 / MP SWITCH
Use this switch to select the external player connected at RCA or MINI JACK connectors or the internal
Media Player as the source for the input channel 1.
5. CH2 / CH3 IN
This is a female combo connector that accepts a XLR or a JACK plug from any dynamic balanced or
unbalanced microphone or line signal. The XLR input is wired as follows:
Pin 1 = shield or ground
Pin 2 = + positive or "hot"
Pin 3 = - negative or "cold"
The balanced JACK input is wired as follows:
Tip = + positive or "hot"
Ring = - negative or "cold"
Sleeve = shield or ground
The unbalanced JACK input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
6. CH2 / CH3 LINE/MIC SWITCH
This switch sets the sensitivity of the respective channel for microphone or line level equipment.
7. CH2 / CH3 LEVEL
This potentiometer sets the level of the respective channel input.
8. HIGH
This potentiometer sets the HIGH TONE level: if rotated clockwise it enhances the highs, if rotated
counter-clockwise it reduces the highs (in the centre position the response is flat).
9. LOW
This potentiometer sets the LOW TONE level: if rotated clockwise it enhances the lows, if rotated
counter-clockwise it reduces the lows (in the centre position the response is flat).
10. EFFECT
This potentiometer sets the level of the effect applied to the CH2, CH3 MIC inputs and wireless mic.
11. MASTER
This potentiometer sets the general level of all signals.
12. ON
GREEN LED that shows the “ON” status of the FREE10LT.