Campomatic C64CN Manuale d'uso

Pagina 15

Advertising
background image

13

ENERGY SAVING” mode


“Energy saving” mode start automatically after 30
minutes if the machine is not used. Leds T5 and
T6 start flashing. Press any key to restart the
normal operation. Leds T5 and T6 will start
flashing until the boiler has reached the optimal
temperature for dispensing of coffee.

Alarms


If there is no water in the tank, led T1 start
flashing and the machine is shut down.
Fill the tank to restore machine operation.

After 20 coffee dispensed led T2 start flashing and
the machine is shut down. Extract the machine
from the cabinet by sliding it all the way out on the
guides. Extract removable drawer for pods located
on the right side of the machine. Empty the
drawer and swich off the machine. Now turn the
appliance on using the main switch “N” in order to
reset the machine.
Push the machine into the cabinet.

PERIODIC MAINTENANCE


The system uses a softening filter which must be
replaced with a spare that you can purchase from
a service centre.

Instructions for replacing the component are
provided on the package of the component.

Softener filter needs to be changed every two
thousand servings.

Cleaning and maintenance


Attention: always wait for the machine to cool
before cleaning.

Ordinary cleaning
For periodical cleaning use a soft damp cloth with
warm water and a mild detergent or specific
products for stainless steel.
Do not use steel wool or blades to remove any
scaling.
Never use abrasive products.
Before performing any routine and/or special
maintenance, check that the unit has been
disconnected from the electrical power supply.
Always keep the appliance clean. Remember to
periodically clean the cup shelf and to empty the
built-in water tank.
Periodically (about once every 5 months), clean
lime from he inside of the boiler by adding to the
fill water half a lass of vinegar or citric acid.
Completely dispense the ntire contents of the tank
with no coffee or pods. When ispensing is
complete, fill the tank with water and run a ew
empty cycles to remove the last residues.

In the event of extended periods of disuse, empty
the ank by pressing the “coffee” key .
Pay special attention when using spray cleaning
products: lways avoid directing the spray towards
the air vents.































13

Advertising