Campomatic DW646BI - Manuale (Pagina 8)

Connect the water filling pipe to the machine correctly as described in the following
instructions.
Connect filling tube to a water outlet with a ¾ threaded gas mouth. Make sure you
tighten it all the way down. It should be connected to a cold water fitting. Make sure you
place the provided filter "A". Use a pair of pliers to tighten the ring nut all the way down. In
models with AQUASTOP th filter is included in the threaded ring nut.
Connection with hot water is not always advisable especially when washing very dirty
dishes, since the cycle duration is shortened.
With the use of hot water (max. 60°C) the duration of the programmes is considerably
shorter.
If the filling pipe is too short, contact a technical service centre for an extension or for
a new pipe
If the pressure in the plumbing circuit exceeds 10 bar a pressure reducer will be
required upstream from the filling pipe
After each cycle, it is advisable to close the water tap. If the appliance will not be
used for a long period of time, unplug it and close the water tap.
The machine can also be supplied with hot water up to a temperature of 60°C.
NO YES YES
6