Fast & Fluid LEOLUX - Manuale (Pagina 18)

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
WARNING
Before switching on the dispenser remove the nut and the tension wires which
lock the rotating table (They are placed inside the machine, as shown).
UNLOCKING THE ROTATING TABLE
(Fig.4)
After the dispenser has been unloaded from the
pallet, the rotating table must be unlocked by
removing the fixing nut used to prevent damage
during transportation. The nut is fixed on a metal
red plate which is located on the front side of the
machine, on the punch support (fig.4). The metal
plate must not be removed.
(Fig.5)
It is also necessary to cut off the two collars.
They are located in the rear internal part of the
dispenser (fig. 5).
COMPUTER POSITIONING
(Fig.6)
If not present, place the computer CPU in its seat
above the elevator (fig. 6).
1155306D-it,en - 17/03/06 18