Samsung RL38HGSW - Manuale (Pagina 17)

17
‑ ASSEMBLY OF THE FREEZER DOOR
REVERSING THE DOOR SWING
‑ REVERSING THE HANDLE BAR [FRIDGE/FREEZER]
15. Detach the CAP SCREW
HANDLE with flat screwdriver and
disassemble the HANDLE BARs.
16. Switch the position of the
CAP HOLE DOORs, pulling
out and pushing them in.
17. Reattach the HANDLE
BARs on the other side of
doors in reverse order.
18. Exchange the positions of a bolt and
the assy HINGE LOW after making a
hole with phillips head driver on the
left bottom side of the unit.
19. After switching the position
of the CAP HOLE HINGE
LOW, reassemble the
COVER LEG FRONT.
20. Switch the position of the
CAP HOLE HINGE MID
and a screw.
21. Switch the position of the
STOPPER DOOR and the
GROMMET HINGE as shown.
22. Switch the position of the
GROMMET HINGE and
the CAP HINGE HOLE.
23. Carefully put the Freezer door
back on and assemble HINGE
MID with 2 bolts and a screw.
24. Carefully put the Fridge door back on.
25. Secure the ASSY HINGE UPP with 3 bolts as shown.
Make sure the Fridge Door is firmly closed.
‑ ASSEMBLY OF THE FRIDGE DOOR
STOPPER
GROMMET
DA99-01220G(1.1).indb 17 2010.6.21 11:40:16 AM