Luce LS328 - Manuale (Pagina 30)

EN
25
DE-REGISTERING HANDSETS
REGISTERING HANDSETS TO BASE UNIT
The handset and base unit are factory pre-registered with each other.
Therefore, the unit should be in full working order out of the box.
When you purchase an additional handset, you have to register it to the
base unit in order to make and answer calls.
You can register up to 5 more handsets to make and answer calls via the
same base unit. Handsets are numbered 1 to 6.
To register a new handset:
1. Press and hold the PAGE button on the cradle of the base unit to enter
Registration Mode.
2. On the handset, press .
3. Use and to select “Handset Setting”, then press .
4. Select “Registration”, then press .
5. Use and to select “Base 1, 2, 3 or 4”, then press .
6. Enter the default Pin Code “0000” then press .
7. You will see the message: “REGISTERING”.
8. When the registration is complete “Registration Success” will appear
on the screen.
NOTE: The base unit will then send a signal to the handset registering the
handset to the base unit. Once the registration function has been completed,
the handset will return to Standby Mode.
To de-register a handset from the Base Unit:
1. On the handset, press
.
3. The paged handset will ring and “INT CALL” will appear on the display.
4. To answer the call on the paged handset, press .
5. Press on the paging handset to transfer the call.
NOTE: If the other handset does not answer, press to end the
intercom call and get back to the external line. Pressing will end both
the intercom call and the external call.
manual-E.p65 2004/10/25, PM 06:49 30