Luce LS328 - Manuale (Pagina 26)

EN
21
SETTING THE BASE UNIT TIME FORMAT
SETTING THE BASE UNIT DATE
6. Press to make the AM / PM option flash. Select AM / PM, then
press to set the time. (When using the 24 hour clock you will not
be asked to select AM / PM.)
1. Follow steps 1 and 2 above, then select “TIME FORMAT” and press
.
2. Select “12 or 24 Hour Format” and press to confirm.
1. Press , then use or to select “SET TIME & DATE”, then
press .
2. Select “SET DATE”, and press .
3. Use or to scroll through the numbers and to move
between the days, months and years.
SETTING THE BASE UNIT DATE FORMAT
1. Follow steps 1 and 2 above, then select “DATE FORMAT” and press
.
2. Select “dd/mm/yy” or “mm/dd/yy” and press to confirm.
SETTING THE BASE UNIT ALARM
1. Press , then use or to select “ALARMS”.
2. Press .
3. Select “Alarm 1” or “Alarm 2”, then press . (A tick will appear
next to a previously enabled alarm.)
4. Select “Yes” and press .
5. Use or to set the time of the alarm and to select hours
or minutes. (If you are using a 12-hour clock format you will need to
select AM or PM using the arrow buttons.)
6. When the time is set, press and “Alarm Tone” options will
appear.
7. Select 1 of the 4 available tones, then press . A tick will appear
next to your selected tone and the phone will go to Standby Mode.
manual-E.p65 2004/10/25, PM 06:48 26