Studiologic Sledge 2.0 Manual - Manuale (Pagina 46)

SLEDGE by Studiologic® 46
AMPLIFIER ENVELOPE
AMPLITUDE
TIME
KEY ON KEY OFF
ATTACK
SUS LEVEL
DECAY SUSTAIN RELEASE
This section has no effect on the frequency of the filter, while it
controls the amplitude (volume) of the sound. In general, the filter
may control large part of the timbre of the sound and consequent-
ly this section can be set with simple parameters. It is also possible
to set the desired envelope in the case that it is chosen not to have
a filter envelope (for instance, leave the amount of the filter at 00).
The parameters have the same function as those of the filter, with
the difference that appears on the vertical axis the amplitude of the
sound and not the frequency of the filter itself.
Note: with fast attack and release very short (close to 0) you can hear evident clicks
during the attack and release, and in some cases the desired characteristic, but
can be eliminated by selecting values slightly different from zero (eg: Attack and
Release 10 ).
Velocity: controls how much the dynamics of the keyboard controls
the volume of the notes, also depending on the selected velocity
curve (in the Midi, page 2). For values close to 0, playing hard will
have no effect on the sound; for values greater or maximum (127)
the dynamics of the keyboard will have the greatest effect on the
volume of sound, increasing the expressiveness of the execution.
Note: the Velocity control has also influence on the Amplifier dynamic response
and it allows to have a kind of control also on the amplitude of the sound and
not only on the Filter frequency and related ADSR control of it. This parameter
makes the sound more expressive, with a very easy control on the overall dynamic
response.
Attention: To make this control useful and active, be sure that the
keyboard sensitivity is not set to “Fixed” (Velocity Curve parameter
of the Midi Section) otherwise it will not have any audible effect on
the sound.
AMPLIFIER ENVELOPE
Amplifier envelope