AJA UDC - Manuale (Pagina 6)

6
I/O Connections
UDC Mini-Converter
Installation
Typically, UDC installation consists of the following steps:
1. Ensure the UDC is disconnected from power.
2. Connect video equipment to the converter BNCs and HDMI connector.
3. Connect audio equipment to RCA connectors (optional)
4. Apply +5 to +20 VDC power to the converter (AJA power supply model
DWP or DWP-U).
5. The UDC will now run using the default factory settings. If you wish to alter
the factory settings, see the following User Controls section.
User Controls
The UDC can be used right out of the box for many applications, since it is
designed to recognize inputs and perform standard actions automatically.
However, you can also manually configure the UDC using either of two methods:
• “Mini Config”software application supplied for PCs and Macs
• DIP switches accessible via a cutout on the back of the UDC case
One of the DIP switches is a “Local/Remote” switch. When in the “Local” mode,
the remaining DIP switches support a subset of the user controls. When in the
“Remote” mode, the normal Mini-Converter non-volatile registers control the unit
(as last set).
SD/HD/3G-SDI
+ 5 to +20 VDC
Power
Input
2-Channel
Unbalanced
Analog Audio
(RCA-style Jacks)
HDMI Output
Input 1 BNC
Reference Input
USB
Port
Red: Lock to HD-SDI
Green: Lock to SD-SDI
Amber: Lock to 3G
LOCK LED
SD/HD/3G-SDI
Output