dB TECHNOLOGIES DVA NETWORK 1.2 Installation Guide - Manuale (Pagina 10)

DVA Network Software Installation
System Requirements
System requirements for DVA Network installation are:
 PC with Microsoft “Windows® XP”, “Windows® Vista” o “Windows® 7” operating system
 PC with Microsoft “Windows® 8” operating system follow the procedures to “Disabling driver
signature and enforcement in Windows® 8” before “DVA Network installation” instructions
 USB interface available
 CD drive or CD burner
Further system requirement could be:
 Internet access to download upgrades or additional information for the product (the user is
responsible to relative costs of the provider and Internet access)
DVA Network installation
To install DVA Network:
Note: Before to start DVA Network installation software on the computer, it is necessary to
disconnect all RDnet devices connected to it.
1. Insert DVA Network’s CD in CD driver or CD burner
2. According to the Windows system configuration, it is necessary to install a 32bit version or a 64bit
version
Inside CD are present two different folder to permit the correct installation.
With 32bit Windows OS:
-
open “Setup DVA Network 1.0 Win 32bit” folder
- select Setup DVA Network 1.0 Win 32bit.exe program to stat installation
With 64bit Windows OS:
-
open “Setup DVA Network 1.0 Win 64bit” folder
- select Setup DVA Network 1.0 Win 64bit.exe program to start installation
Note: To install DVA Network program, the computer needs “.NET Framework 4.0” or higher.
If the program isn’t installed, it is present a dedicated folder “dotNet Framework Setup”
on CD where inside it is present “dotNetFx40_Full_x86_x64.exe” file
Start the program following the guided procedure.
3. Program starts and appears this windows
Proceed with the guided procedure
Example with 64bit version
Click “NEXT>” button to proceed

