Samsung DTB-B570 - Manuale (Pagina 31)

GB-14 D I G I T A L T E R R E S T R I A L R E C E I V E R
DTB-B570E
BASIC FUNCTIONS
GB-15
DTB-B570E
GB
OPERATING THE RECEIVER
6. EPG (Electronic Program Guide)
EPG-Electronic Program Guide
The electronic program guide gives you a channel list for the
channels.
N No otte e : 1. This service depends on service provider.
2. After receiver recognized the GMT-time from the signal
which takes few seconds, it can display correct EPG
information.
● Press the GUIDE key while you are viewing a program.
This function is displayed on the screen by using only time.
● RED key : Red key is for moving back to the
previous date.
● GREEN key : Green key is for moving to the next coming date.
● i key : This key is used to watch the program information, if there is more
information than one page. Use the œ/ƒ keys to move up and down
pages.
● ¦/‹ key : Use to display the program list by 30
minutes per block.
Time interval can be adjusted by press keys as followings on EPG screen:
1 Key: 1 hour and 30 minutes 2 key: 30 minutes 3 key: 15 minutes
● Select the channel by pressing the œ/ƒ keys and press the OK key to watch this channel.
Main Menu
After installing your antenna system and STB with appropriate
connectors.
● Plug in the AC main power and switch on the receiver.
● Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Installation, Channel Organization and
Parental Lock, you need the PIN Code.
1. Installation
This menu consists of 3 sub-menus:
Auto Scanning, Manual Scanning and
Reset to Factory Defaults.
● Select “Installation” in the main menu mode to select the sub
menu.
● Enter the PIN Code.
If you have not entered your own PIN Code then the PIN Code
0000 applies, which was set at the factory.
00427A_B570E_XET_Eng2304 4/23/07 8:23 PM Page 14