Atlantis Land DiskMaster NASG302D - Manuale (Pagina 44)

ENGLISH
DiskMaster 44
1.9 Hard Disk setup
If the hard disks are being installed for the first time, you need to initialize
the disks before you can use them. Follow the steps described below.
Open the web browser, enter the local port IP address of this
DiskMaster, which default at
192.168.1.1 , and click Go to get the login
page.
The default username is admin , password atlantis and click
“OK”
to
continue.
To configure your DiskMaster, you will need to use the
web browser, enter the IP address and then use the web
configuration for further setup. To find out the IP address
(if You changed) of your device once it is connected to
the network, there are several different ways as
described on the following pages.
Use
the Setup utility included on the CD
( CDRom\Utility\SetupUtil.exe ). This will list the device
automatically and allow you to access the web
configuration interface with a simple click of your mouse.