6 cleaning the oven door, 7 replacing the lamp – Electrolux EOL3430DAX Manuale d'uso
Pagina 20

WARNING!
Make sure that the heating
element is correctly installed
and that it does not fall down.
10.6 Cleaning the oven door
The oven door has three glass panels.
You can remove the internal glass panels
to clean them.
CAUTION!
Do not use the appliance
without the glass panels.
The direction in which you
open the door depends on
your oven model. You open
the door from the right side in
some models and from the
left side in others.
1. Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
A
2. Hold the inner glass B tightly with both
hands and slide it upwards to remove
it from its initial position. Do the same
with the second glass panel.
Make sure that you tightly hold the
glasses to prevent them from falling.
B
3. Clean the door with a wet sponge and
rub it dry with a soft cloth. Do not use
steel wool, acids or abrasive cleaning
agents because they can damage the
surface.
When the oven door is clean, install the
glass panels in the opposite sequence.
The middle glass panel has a small dot on
the top and the second one has screen
printings. Make sure that you put the
middle glass panel in the correct seats.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame is not rough when you touch
it.
A
B
10.7 Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
www.electrolux.com
20