Atlantis Land DiskMaster F301D - Manuale (Pagina 50)

ENGLISH
DiskMaster 50
1.10 How to login
To configure your DiskMaster , you will need to use the web browser, enter
the IP address and then use the web configuration for further setup. To find
out the IP address of your device once it is connected to the network, there
are several different ways as described on the following pages.
Use the Setup utility included on the CD. This will list the device
automatically and allow you to access the web configuration interface with
a simple click of your mouse. You may also use the same utility at a later
point to map the network drive after you setup your shares.

Turn on your DiskMaster and make sure it is connected to the same
network as your computer.

Start the Setup utility ( CDRom:\Utility\setupUtil.exe ) by double
clicking on the Setup file and then pressing the Setup button.

Your DiskMaster will automatically show up in the device list, but if not
(click again on
Search Again ), make sure the Setup utility has access
to the network and search again. You might have to configure your
firewall or even temporarily turn it off.

Select your device and click on OK to start the setup wizard.

Before you can access the device, you will have to enter the admin
password. The default login is
admin/atlantis , so enter admin for the